Colours & Measures
Cembrit Windstopper Extreme
Selected colour: Natural grey
Natural grey
Dark grey
All Cembrit product colours presented on the website are representative and might vary from the original product colours.
| Appearance | Thickness | Width | Length |
|---|---|---|---|
| 2 colours | 4.5 - 9 mm | 900 - 2700 mm | 900 - 3000 mm |
| 2 colours | 4.5 - 9 mm | 900 - 2700 mm | 900 - 3000 mm |
For exact available specifications on your market, please visit local website.
Cembrit Windstopper Extreme
Cembrit Windstopper Extreme
Cembrit Windstopper Extreme is a special type of build board that features a windproof membrane for exterior walls. The board consists of grey cement and limestone filler, reinforced with a specially selected fibre material that can absorb and release moisture without affecting the durability, strength or performance of the board.
Cembrit Windstopper Extreme has a very low vapour transmission resistance, enabling moisture from inside the building to pass through. In consequence, insulation can be placed directly against the inner side of the board. The board is powerfully resistant towards both rot and fungal growth and can withstand considerable fluctuations in weather and climate conditions. Adding to this, the Cembrit Windstopper Extreme is non-combustible.
When installed according to Cembrit installation instructions, Cembrit Windstopper Extreme will function as a temporary facade for up to 12 months. Please note that Cembrit Windstopper Extreme cannot be used as a permanent facade sheet in accordance to the guidelines provided by Cembrit on Cembrit.com
Product features:
NON COMBUSTIBLE
DURABLE
MOISTURE RESISTANT
MOULD RESISTANT
VAPOUR PERMEABLE
SUSTAINABLE
WARRANTY
Technical data
Material
Fibre cement
Coating and surface
No coating
Type
Cembrit Windstopper products consist of natural materials and variations may occur in the product colour or other characteristics from board to board.
Colours
2
Fixing - aluminium
Not applicable for this product
Fixing - steel
Cembrit Windstopper Extreme is fastened with Cembrit SCR-S 4.2x30 mm Universal screw on a steel frame. No pre-drilling is needed.
Fixing - wood
Cembrit Windstopper Extreme is fastened with Cembrit SCR-W 3.9x38 mm Universal screw on a wood frame. No pre-drilling is needed.
Downloads
Cembrit Windstopper Extreme
References
Cembrit Windstopper Extreme
Selected colour: Natural grey